Welcome to the CADSTARguys Blog - Information, hints, tips and my waffle on the CADSTAR Printed Circuit Board design suite.

Please note that all names used are completely fictitious and any thing written is my own personal opinion or knowledge and not related in any way to either my employers or their customers (or Zuken).
Also this is not a replacement for proper Maintenence/support and you should read the help files before asking anything techy:).

Monday 11 October 2010

Layers in CADSTAR.

As requested - some information on setting up your layers in CADSTAR.
(Pull up a chair and make a coffee - its a long one).

What is all this layer stuff about then?...

So you are designing a printed circuit board - this is generally a fibreglass inner core with copper tracks on the outside. Although the inner core can be made of many different laminate materials depending upon the boards use, FR4 (Fibreglass) is the most common.

On the outside copper layers, which are completely covered in copper before the board is made - the tracks that you design will be what is left on the board when it is manufactured.

How to manage board Mounting holes in your PCB designs.

Recently I have seen comments on the web recently from people asking "how do I do mounting holes in CADSTAR?".

There are a few methods that you can use to implement mounting holes in CADSTAR.
Which one you choose is dependant upon the type of hole you want and how you want to use it.